Ortur Laser Master 2 Review 2023 – The Laser Master 2 is an open-frame, hobbyist, benchtop laser engraving machine from Ortur.
Ortur Laser Master 2 Review 2023
#01 – ORTUR Laser Master 2 S2 SF Laser Engraver,
ORTUR Laser Master 2 S2 SF Laser Engraver, 5.5W Output Power DIY Laser Cutter and Engraver, Laser Engraving Machine Support Lightburn, Laser Engraver for Wood and Metal, Acrylic
- 💜 Ultra-Fine Compression: Ortur Laser Engraver has 32-bit Professional motherboard, which is smarter, faster, more accurate and easier to use. Ultra-fine laser focal area is reduced to 0.12*0.15mm, The engraving machine speed can be as high as 5000 mm/min. The laser cutter can cleanly cut 6mm plywood plate in one pass.
- 💙 Safety protection: Laser Engraver newly upgraded Safety protection. 1. There is a G-sensor on the motherboard, When the engraving machine is displaced or tilted, it will automatically stop the laser; 2. If your computer system halted or USB cable disconnected, led to that the laser engraver stops moving, the laser beam will stop, to prevent fire. 3. The engraving machine is turned on, but there is no movement for a long time, the laser will be turned off automatically.
- 💚 New eye protection design: The laser engraving machine with newest panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light to perfectly protect your eyes to reduce the cost of your goggles and the inconvenience of wearing goggles.
- 💛 Extensive Compatibility & Uses: Ortur laser engraver and cutter can engraving cylinders by add to rotaty rollers. Unleash your creativity on over one hundred materials including paper, bamboo, wood, leather PCB board, aluminum oxide, metal, glass, etc.compatible with various mature engraving software, such as LaserGRBL(Free), LightBurn(Paid). The ORTUR laser cutter supports Win 7 / Win 8 / XP / Win 10 / Win 11, and also support MacOS and Linux system.
- 💝 Laser Cutter with Wide Compatibility - ORTUR Laser master 2 S2 SF compatible with various mature engraving software, such as LaserGRBL (Supports Windows XP / 7 / 8 / 10), LightBurn (Supports Windows / Mac OS / Linux)
#02 – ORTUR Laser Engraver, Laser Master 2 S2 LF,
ORTUR Laser Engraver, Laser Master 2 S2 LF, 5.5W Output Laser Engraving Cutting Machine, 0.17 * 0.25mm Fixed-Focus Compressed Spot Eye Protection Laser Cutter for DIY Metal, Wood (390x410mm)
- ✅Ultra-Fine Compression: Ortur Laser Engraver has 32-bit professional motherboard, which is smarter, faster, more accurate and easier to use. Output power is 5W-5.5W, Engraving area is 390*410mm. Ultra-fine laser focal area is reduced to 0.17*0.25mm, The engraving machine speed can be as high as 5000 mm/min. The laser cutter can cleanly cut 6mm pine board in one pass. The laser cutter comes with an air assist nozzle, use with our air pump could support a higher speed and cut better.
- ✅Safety protection: Laser Engraver newly upgraded Safety protection. 1. There is a G-sensor on the motherboard, When the engraving machine is displaced or tilted, it will automatically stop the laser; 2. If your computer system halted or USB cable disconnected, led to that the laser engraver stops moving, the laser beam will stop, to prevent fire. 3. The engraving machine is turned on, but there is no movement for a long time, the laser will be turned off automatically.
- ✅New eye protection design: The laser engraving machine with newest panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light to perfectly protect your eyes to reduce the cost of your goggles and the inconvenience of wearing goggles.
- ✅Extensive Compatibility & Uses: Ortur laser engraver and cutter can engraving cylinders by add to rotaty rollers. Unleash your creativity on over one hundred materials including paper, bamboo, wood, leather PCB board, aluminum oxide, metal, glass, etc.compatible with various mature engraving software, such as LaserGRBL(Free), LightBurn(Paid). The ORTUR laser cutter supports Win 7 / Win 8 / XP / Win 10 / Win 11, and also support MacOS and Linux system.
- ✅Quality and Assurance: The entire engraving machine adopts a modular design, which is convenient for users to assemble, repair, and replace and update machine parts. We are the manufacturer of ORTUR. We only provide Amazon customers with the best quality and comprehensive pre-sales and after-sales services. The engraving machine enjoys a one-year warranty. If the engraving machine fails during the warranty period, please contact us.
#03 – ORTUR Laser Master 3 10W Output Power Laser Engraver,
ORTUR Laser Master 3 Laser Engraver, 10W Higher Accuracy Laser Cutter, 20000mm/min Engraving Speed and App Control Laser Engraver for Wood and Metal, 15.75"x15.75" (The top-of-The-Range Version)
- 🚀🚀Higher Speed with Powerful 10W Laser Module - It is able to cut off 12-15mm thick plywood as well as the 12mm thick black acrylic board with only one pass, and even cut the 30mm thick black acrylics without any issues. Meanwhile, the focusing spot area of the new laser is only 1/3 of other ordinary lasers and Integrated Air Assist/ Dual Fans/Foldable Focal Gauge/ All in 235g Weight. It can work very well at high speed of 20000mm/mim, save you half time than other similar brands.
- 🚀🚀APP Control & User Friendly - ORTUR Laser Master 3 supports TF Card/USB/Wi-Fi/APP. Professional APP- Laser Explorer, Easy to Use/Automatic Operation Guide/Novice Friendly, is compatible with iPhone, Android Phones, iPad and Android Pad. Drag the NC file to the SD card, the machine starts working, and then you can turn off the computer or mobile phone without worrying about disconnecting, which is more convenient to print for a long time.
- 🚀🚀Super Fine Engraving & Cutting with Eye-protection Cover Design - ORTUR Laser Master 3 adopts the most advanced spot compression laser technology, and the laser focus spot is as fine as 0.05 x 0.1 mm, which makes the engraving and cutting effect very fine. The filter panorama shield can filter 97% of ultraviolet rays, which plays a good role in protecting the eyes. You and those around you don't need to wear goggles to get a clear view of the laser engraving.
- 🚀🚀The Top Safe Laser Engraving and Cutting Machine - ORTUR Laser Master 3 comes with 7 safety protection systems: 1. Safety Lock (Keep the Key, Professional Use Only) 2. Active Position Protection 3. Sloping Position Protection 4. Exposure Duration Detection and Limitation 5. Voltage and Current Safety Control System 6. Host Computer Watchdog 7. Emergency Stop Switch, which give you a safe environment for engraving and cutting.
- 🚀🚀Wide Compatibility - Ortur Laser master 3 supports Web UI, also compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP/ 7 /8 / XP / 10, and also support MAc system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc.
#04 – ORTUR Laser Master 3 Gold with Foldable Feet,
#05 – ORTUR 24V Laser Engraver 2 Pro-S2-SF,
ORTUR 24V Laser Engraver 2 Pro-S2-SF, Laser Cutter 5.5W Output Power Laser Machine Eye Protection, Laser Master with 400X400mm, 10000mm/min Laser Engraving Machine for Metal and Wood
- ✅[Ortur new upgrade pro model] Laser Master 2 Pro S2 SF is newly upgraded, adding new functions such as flame detection, emergency stop, etc., with stronger system reliability, smooth engraving, faster engraving speed, higher accuracy, and more refined engraving products. The new upgrade brings users a better experience!
- ✅[Overall optimization] Laser Master 2 Pro S2 SF has a longer service life, because the mechanical structure has been optimized and designed to have a faster speed and can work stably for a long time. At the same time, Ortur Laser Master 2 Pro can provide users with more security because it has more security features.
- ✅[Accessories system update] 1. Because it is equipped with the latest OLM-PRO-V10 motherboard, the engraving is smoother and more delicate, the engraving accuracy is higher, and the speed is faster. 2. The circuit system with 24V voltage is upgraded, the current is lower, and the system is safer. 3. Update Ortur Laser 1.8 firmware, which is the most advanced laser engraving machine firmware at present, with more powerful functions. 4. Support Ortur offline control screen.
- ✅[Product advantage] Ortur Laser 1.8 firmware is based on OLF1.5 firmware upgrade, optimizes the motion algorithm, and increases the maximum motion speed from 4000mm/min to 10000mm/mm. The focus of the LU2-4 laser module is smaller because of it. It is the second-generation FAC laser module, the focal point is only 0.12*0.15mm, and the focal area is about a quarter of the first-generation 0.23*0.23mm. So he can cut through 4mm plywood and 8mm pine board at a time.
- ✅[Safety protection]1. When the engraving machine is displaced or tilted, it will automatically stop the laser to prevent damage to the target from the laser; 2. When the engraving machine or computer crashes, the laser will stop working immediately to prevent continuous fire. 3. The engraving machine is turned on, but there is no movement for a long time, it will be protected, and the laser will be turned off automatically. 4. Flame Detector + Buzzer Alarm 5. Emergency stop switch for emergency
#06 – ORTUR Laser Rotary Roller,
ORTUR Laser Rotary Roller, 360° Laser Engraver Y-axis Rotary Module for Engraving Cylindrical Objects Cans, 7 Adjustment Diameters, Min to 8mm, Compatible with Most Laser Engraving Machines
- ✅【Cylindrical object carving】The rotary roller module can be used at cylinders or small diameter cylinders, such as round wood, cups, bottles, pipes, bowls, guitars, drums and tubes and over-length plate engraving or cutting.
- ✅【7 Adjusted Diameters】Rotating the engraving axis can increase the original engraving area,The diameter can be adjusted in 7 steps,and the engraving diameter can be as small as 8mm, and up to 110mm, meets the engraving needs of different angles.
- ✅【Easy to operate】link the engraving machine and the computer system, advanced new products, more intelligent.Use LaserGRBL or LightBurn (It's the most popular paid carving software in the world, very easy to use). Supports Windows XP, 7, 8, 10, Mac OS, and Linux.
- ✅【Extensively Compatible】ORTUR Laser Rotary Rollers can compatible with other brands of engraving machines, NEED SWAP the blue and green wires at one end of the cable.
- ✅【Quality and Assurance】We are ORTUR manufacturer. We provide the highest quality and comprehensive pre-sales and after-sales service. If you have any questions, please feel free to contact us.
#07 – ORTUR YRR 2.0 Rotary Roller,
ORTUR Laser Rotary Roller YRR 2.0, Compatible with Most Laser Engraver, 360° Y-axis Laser Engraver Rotary Attachment for Engraving Cylindrical Objects, 7 Adjustment Diameters, 8mm to 00mm
- 👍 Excellent Laser Engraver Accessories - Achieve 360 degree rotation engraving, which can be used at longer cylinders, small diameter cylinders, over-length plate engraving, over-length plate cutting.
- 👍 7 Level Adjustable Width - The diameter can be adjusted in 7 diameters, and the engraving diameter can be as small as 8mm and up to 100mm.
- 👍 Strong Friction - ORTUR laser rotary roller 2.0 with all-metal structures, safe and stable,one-piece thickened rubber roller, stronger friction, more stable engraving process, making the engraved cylinder perfect follow the motor to rotate synchronously.
- 👍 Wide Compatibility - ORTUR laser rotary roller 2.0 is applicable to 95% of the engraving machines on the market. Link the engraving machine and the computer system, more intelligent.
#08 – Twotrees TTS-25 20W Laser Engraver Machine Laser
TTS-25 2.5W Laser Engraver Machine Laser Cutter Laser Cutting Engraving Machine Engraving Tool for Wood Leather Aluminum
- Laser power: 2.5W, machine electric output power: 20W.
- Fixed Focus Laser: TTS-25 uses fixed focus laser, no need to adjust the focus before engraving, engraving accuracy: 0.1mm.nge paper.
- 🍀 32-bit Motherboard 🍀: The motherboard adopts 32-bit dual-core MCU, which has a faster processing speed, and the engraving speed can reach 10000mm/min. Laser can engrave online and TF card offline engraving. Due to the built-in WIFI module, you can also use mobile phone App and computer WEB for engraving.
- 【Perfectly Compatible System】 Use LaserGRBL or LightBurn (It's the world's most popular paid carving software, very easy to use). Supports Windows XP, 7, 8, 10 (use LaserGRBL), Mac OS and Linux (use LightBurn). mobile app: MKSLaser (for Android and IOS system), can be downloaded from the mobile store.
- Capability of engraving and cutting: TTS-25 is mainly used for engraving. TTS-25 laser can engrave wood, plywood, paper, leather, bamboo, sponge paper, alumina, acrylic, etc. Laser can cut 2mm plywood. Working Area: 300x300mm.
#09 – Honeycomb Laser Bed,
Honeycomb Laser Bed, Laser Cutting Honeycomb Working Table 17.32x18.5x0.87 inch for ORTUR Laser Engraver, Diode Laser Engraving Machine, Fixture Design & Table-Protecting
- Anti-skid Metal Long Fixture Fixation - Long Fixture design with scale is suitable for fixing various sizes of carvings, which greatly prevents the objects from shifting to the extra position during the engraving process and prevent the carvings from deforming. The scale on the Long Fixture let you accurately know the range of engraving and cutting.
- Give You Double protection - The honeycomb working table comes with an aluminum panel that can protect your desk from laser damage. We also provide four corner protectors to prevent your hands from being in any potential danger. It is very suitable for CO2 or diode laser engraving machine.
- Honeycomb Laser Bed with Fast Heat Dissipation - This honeycomb working table is made of iron and aluminum, which makes them much more stable, durable and rust-resistant. Flat and smooth with uniform honeycomb holes design accelerates the smoke, which solves the problem of wood and other materials blackening due to smoke and enhances the carving effect.
- Wide Compatibility - This honeycomb working table set is a perfect accessories for ORTUR laser engraving machines. The honeycomb plate is also compatible with other laser engraving machines such as diode DIY laser engraving machine, fiber and CO2 laser engraving machine, as long as the size is appropriate.
- Give Your Laser Module a Best Protection - This Honeycomb Working Table is used to prevent the laser reflection from damaging the laser head during the process of cutting and prolong the service life of the laser module.
#10 – ORTUR Laser Master 3 with Foldable Feet Laser Cutter,
Related Tags: